Zodify

$55.00

40% split keyboard with 52 Choc V1 keys, Choc key cap spacing, per key and underglow RGB LEDs, EZ-VIK connectors for accessories, and footprints for either EC11 encoders, or DIY 3D printed roller encoders. Uses the 35 pin variant of the RP2040 Pro Micro with QMK firmware, with future support for wireless ZMK wireless Pro Micro MCUs (ZMK firmware still being actively developed, supports Nice!Nano v2 and the SuperMini nRF52840).

40% split keyboard with 52 Choc V1 keys, Choc key cap spacing, per key and underglow RGB LEDs, EZ-VIK connectors for accessories, and footprints for either EC11 encoders, or DIY 3D printed roller encoders. Uses the 35 pin variant of the RP2040 Pro Micro with QMK firmware, with future support for wireless ZMK wireless Pro Micro MCUs (ZMK firmware still being actively developed, supports Nice!Nano v2 and the SuperMini nRF52840).

52 Key split keyboard running on QMK Firmware, with Choc hotswap sockets support, per-key and underglow RGB, support for multiple touchpads, and full EZ-VIK connector support for many additional modules. This is a fully DIY kit.

This kit comes with:

  • 2x Zodify PCBs

  • 54x T4 SMD Diodes

  • 52x SK6803 MINI-E RGB LEDs (Per-Key LEDs)

  • 14x SK6805 MINI-HS RGB LEDs (Underglow)

  • 52x Kailh Choc Hotswap Sockets

  • 2x 6mm Reset Tactile Buttons

  • 8x 1uf Capacitors

  • 2x Lil-CC USB-C Interconnect Boards

  • 2x EZ-VIK FPC Connector Boards

To complete this kit, you will need to purchase the following separately:

  • 52x Choc Style switches and keycaps (66x 1U, 2x 1.5u) (CHOC SPACING ONLY PROFILES - Such as CFX, MBK, and the upcoming LDSA)

  • Top/Bottom Plates or Case - 3D printable cases available

  • USB-C to USB-C cable for the interconnect.

  • 2x EC11 (Or Dual Axis EC11) Encoders and knobs

  • 2x RP2040 35 Pin Pro Micro AliExpress Keebio

Additional optional components (Note that each half only supports one additional device at a time, such as a single Cirque touchpad, or VIK module):

  • 1x or 2x Clacker Solenoid Haptic VIK module

  • 1x or 2x Cirque touchpads

  • 1x or 2x Azoteq Touchpads (TPS65 or TPS43)

  • 1x or 2x VIK compatible modules (Recommend Fingerpunch for all VIK modules: https://fingerpunch.xyz/product-category/vik-modules/ )

  • Github link to all 3D printable mounting models and templates: (To Do)

***Please note this is a fully DIY kit, with the main MCU being self-sourced, and all soldering done by the customer. This is a intermediate level build, and it is highly recommend that you have some SMD soldering experience, and experience using a multimeter for continuity testing. Please check for continuity between VCC and GND on your MCUs on both sides before plugging into a USB port, if you detect a short, do not plug the keyboard into a USB port to prevent damage, and check your soldering. Split Logic Keyboards is not responsible for damaged equipment due to faulty soldering or MCUs. All support is provided through our Discord server #build-help channel.